Universal & Production Device Programmers, Adapters | Elnec
show-menu
0 items | view cart Elnec online orders

Device: ATSAMD20G15A (ISP)

Manufacturer: Atmel

Part number description for this device:

Move the cursor over the box to highlight particular section
AT Atmel  
SAMX Product Family SAMD = General purpose microcontroller
SAML = Low power GP microcontroller
SAMC = 5V microcontroller
SAMR = SoC microcontroller with RF
SAMG = General purpose low-power high-performance MCU
XX Product Series 10 = Cortex M0+, DMA
11 = Cortex M0+, DMA, USB
20 = Cortex M0+, Basic Feature Set
21 = Cortex M0+, Basic Feature Set, DMA, USB
22 = Cortex M0+, Advanced Feature Set, DMA, USB, SLCD
30 = Cortex M0 + CPU, Advanced Feature Set, DMA, USB
55 = Cortex M4, FPU
D51 = Cortex-M4F + Advanced Feature Set
E51 = Cortex-M4F + Advanced Feature Set + 2x CAN
E53 = Cortex-M4F + Advanced Feature Set + Ethernet
E54 = Cortex-M4F + Advanced Feature Set + Ethernet + 2x CAN
X Pin Count E = 32 pins
G = 48 pins
J = 64 pins
N = 100 pins
P = 120/128 pins
XX Flash Memory 14 = 16kB
15 = 32kB
16 = 64kB
17 = 128kB
18 = 256kB
19 = 512kB
20 = 1MB
X Device Variant A = Default variant
B = Improved low power
L = Pinout optimized for analog a PWM
X Package Type A = TQFP
M = QFN
C = UBGA
U = WLCSP
CT = TFBGA
X Package Grade U = -40°C - 85°C Matte Sn Platting
H = -40°C - 85°C NiPdAu Platting
N = -40°C - 105°C Matte Sn Platting
F = -40°C - 125°C Matte Sn Platting
X Package Carrier Blank = Tray (Default)
T = Tape&Reel

Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.

go back to result page

Supported by programmers and programming adapters/modules:

BeeHive204 adapter/module: Note: via ISP connector Paid ISP support, usage of this device require active 'Credit box' attached to PC
BeeHive204AP adapter/module: Note: via ISP connector Paid ISP support, usage of this device require active 'Credit box' attached to PC
BeeHive208S adapter/module: Note: via ISP connector Paid ISP support, usage of this device require active 'Credit box' attached to PC
BeeProg2 adapter/module: Note: via ISP connector Paid ISP support, usage of this device require active 'Credit box' attached to PC
BeeProg2AP adapter/module: Note: via ISP connector Paid ISP support, usage of this device require active 'Credit box' attached to PC
BeeProg2C adapter/module: Note: via ISP connector Paid ISP support, usage of this device require active 'Credit box' attached to PC
BeeHive204AP-AU (discontinued) adapter/module: Note: via ISP connector Paid ISP support, usage of this device require active 'Credit box' attached to PC
go back to result page
🍪
Back to TOP